TA01
Conversion from TA-03F to TA-03R:
To completely change the balance and handling of the model, you can convert a TA-03F into a TA-03R by replacing the following parts:
– Code 50768 chassis for TA-03R,
– Code 50743 part B for TA-03R; front gearbox of the TA-03R, completely different from the TA-03F,
– Code 9225056 short front-right shock absorber,
– Code 9225056 short front-left shock absorber,
– Code 53291 front gearbox pulley with 15 teeth, and
– Code 53291 rear gearbox pulley with 15 teeth.
Conversion from TA-03R to TA-03F:
To completely change the balance and handling of the model, you can convert a TA-03R into a TA-03F by replacing the following parts:
– Code 50719 chassis for TA-03F,
– Code 50699 part B for TA-03F; upper parts of the TA-03F front gearbox, completely different from the TA-03R,
– Code 50599 front-right shock absorber,
– Code 50599 front-left shock absorber,
– Code 53286 front gearbox pulley with 16 teeth, and
– Code 53286 rear gearbox pulley with 16 teeth.
Conversion from TA-03FS to TA-03RS:
To completely change the balance and handling of the model, you can convert a TA-03FS into a TA-03RS by replacing the following parts:
– Code 50743 part B for TA-03R; the front gearbox of the TA-03R, completely different from the TA-03F,
– Code 9225056 short front-right shock absorber, identical to those installed at the rear,
– Code 9225056 short front-left shock absorber, identical to those installed at the rear,
– Code 53291 front gearbox pulley with 15 teeth, and
– Code 53291 rear gearbox pulley with 15 teeth.
Conversion from TA-03RS to TA-03FS:
To completely change the balance and handling of the model, you can convert a TA-03RS into a TA-03FS by replacing the following parts:
– Code 50699 part B for TA-03F; upper parts of the TA-03F front gearbox, completely different from the TA-03R,
– Code 50599 front-right shock absorber,
– Code 50599 front-left shock absorber,
– Code 53286 front gearbox pulley with 16 teeth, and
– Code 53286 rear gearbox pulley with 16 teeth.
Conversion from TA-03F to TA-03F PRO:
To improve the performance of a TA-03F chassis, you can replace the plastic tub chassis with a double FRP chassis, acronym for “Fiber Reinforced Polymer”. For this conversion, Tamiya offers the parts set Code 53306, described as the “TA-03F FRP Chassis Conversion Set” (refer to the image on the right showing the components included in the set). This conversion transforms a TA-03F into a TA-03F Pro, model number 58177.
These are the instructions for building the chassis with the front and rear gear assemblies already prepared.
Additional accessories are available to enhance performance and achieve a replica of the TA-03F PRO Special Edition model 58200. The list is closely tied to the image below, with the parts listed following the order in which they are arranged in the image, starting from the top-left corner and moving to the right and downward:
– Code 53056 described as “Pin Type Wheel Adapter Tamiya”,
– Code 53172 described as “TA-03 Universal Drive Shaft 1 pair,” alternatively, two sets with anodized collars are available: Code 53310 described as “TA-03 Universal Drive Blue Shaft 1 pair” and Code 49098 described as “TA-03 Universal Drive Shaft Pink 1 pair”,
– Code 53200 described as “4WD Front One-Way Diff Unit”,
– Code 53238 described as “Quick-Release Battery Holder” (not shown in the image below),
– Code 53276 described as “TA-03 Fluorescent Stabilizer Set,” including three different stabilizer bars: blue for hard setup, yellow for medium setup, and red for soft setup of the anti-roll bar,
– Code 53288 described as “TA-03 Aluminium Rear Upright”,
– Code 53316 described as “TA-03 Aluminium Front Hub Carrier 1 pair”,
– Code 53325 described as “TA-03 Aluminium Knuckle Arm 1 pair”,
– Code 53326 described as “TA-03 Aluminium Racing Steering Set”,
– Code 53357 described as “TA-03 Aluminium Motor Plate”,
– Code 53302 described as “TA-03F Carbon Chassis”.
It is possible to further improve performance by installing the aramid fiber-reinforced belt, which is thinner than the standard one and does not require a tensioner. Code 49102, blue, described as “TA-03F / R Belt Blue.”
Conversion from TA-03R to TA-03R FRP:
There is no TA-03R model in Tamiya’s portfolio that comes from the factory with a dual FRP chassis plate. The closest model is the TA-03R TRF, which features a dual carbon chassis plate. To enhance the performance of a TA-03R chassis, you can replace the plastic tub chassis with a dual FRP chassis. For this conversion, Tamiya offers the parts set Code 53350, described as the “TA-03R FRP Chassis Conversion Set” (refer to the image on the right that shows the components included in the set).
These are the instructions for building the chassis with the front and rear gear assemblies already prepared.
Additional accessories are available to enhance performance and achieve a more faithful replica of the TA-03R TRF version. The list is closely tied to the image below, with the parts listed following the order in which they are arranged in the image, starting from the top-left corner and moving to the right and downward:
– Code 53056 described as “Pin Type Wheel Adapter Tamiya”,
– Code 53172 described as “TA-03 Universal Drive Shaft 1 pair,” alternatively, two sets with anodized collars are available: Code 53310 described as “TA-03 Universal Drive Blue Shaft 1 pair” and Code 49098 described as “TA-03 Universal Drive Shaft Pink 1 pair”,
– Code 53200 described as “4WD Front One-Way Diff Unit”,
– Code 53238 described as “Quick-Release Battery Holder”,
– Code 53276 described as “TA-03 Fluorescent Stabilizer Set,” including three different stabilizer bars: blue for hard setup, yellow for medium setup, and red for soft setup of the anti-roll bar,
– Code 53288 described as “TA-03 Aluminium Rear Upright”,
– Code 53316 described as “TA-03 Aluminium Front Hub Carrier 1 pair”,
– Code 53325 described as “TA-03 Aluminium Knuckle Arm 1 pair”,
– Code 53326 described as “TA-03 Aluminium Racing Steering Set”,
– Code 53357 described as “TA-03 Aluminium Motor Plate”,
– Code 53364 described as “TA-03R Carbon Steering Bar”,
– Code 53363 described as “TA-03R Carbon Chassis Set”.
It is possible to further improve performance by installing the aramid fiber-reinforced belt, which is thinner than the standard one and does not require a tensioner. Code 49102, blue, described as “TA-03F / R Belt Blue.”
Conversion from TA-03F-S to TA-03F-S PRO:
There is no TA-03F-S PRO model in Tamiya’s portfolio that comes from the factory with a dual FRP short-wheelbase chassis plate. The closest model is the TA-03F PRO, featuring a dual FRP standard-wheelbase chassis plate. To enhance the performance of a TA-03F-S chassis, Tamiya offers an accessory that makes it possible to replace the plastic tub chassis with a dual FRP chassis.
To convert a TA-03F-S plastic tub chassis into a TA-03F-S PRO dual FRP chassis, the accessory Code 53387, described as “TA-03 FS / RS FRP Chassis Conversion Set,” is available (refer to the image on the right showing the components included in the set).
These are the instructions for building the chassis with the front and rear gear assemblies already prepared.
There is no TA-03F-S PRO Special Edition model in Tamiya’s portfolio that comes from the factory with a dual short-wheelbase carbon chassis plate. However, additional accessories are available to enhance the performance of what has been achieved by installing accessory 53387. The list is closely tied to the image below, with the parts listed following the order in which they are arranged in the image, starting from the top-left corner and moving to the right and downward:
– Code 53056 described as “Pin Type Wheel Adapter Tamiya”,
– Code 53172 described as “TA-03 Universal Drive Shaft 1 pair,” alternatively, two sets with anodized collars are available: Code 53310 described as “TA-03 Universal Drive Blue Shaft 1 pair” and Code 49098 described as “TA-03 Universal Drive Shaft Pink 1 pair”,
– Code 53200 described as “4WD Front One-Way Diff Unit”,
– Code 53238 described as “Quick-Release Battery Holder” (not shown in the images below),
– Code 53276 described as “TA-03 Fluorescent Stabilizer Set,” including three different stabilizer bars: blue for hard setup, yellow for medium setup, and red for soft setup of the anti-roll bar,
– Code 53288 described as “TA-03 Aluminium Rear Upright”,
– Code 53316 described as “TA-03 Aluminium Front Hub Carrier 1 pair”,
– Code 53325 described as “TA-03 Aluminium Knuckle Arm 1 pair”,
– Code 53326 described as “TA-03 Aluminium Racing Steering Set”,
– Code 53357 described as “TA-03 Aluminium Motor Plate”,
– Code 53386 described as “TA-03RS/FS Carbon Chassis.”
It is possible to further improve performance by installing the aramid fiber-reinforced belt, which is thinner than the standard one and does not require a tensioner. Code 49103, red, described as “TA-03F-S / RS Belt Red.”
Conversion from TA-03R-S to TA-03R-S TRF:
To convert a TA-03R-S chassis into a TA-03R-S TRF, the parts set Code 53387, described as “TA-03 FS / RS FRP Chassis Conversion Set,” is available (refer to the image on the right showing the components included in the set). The 53387 set includes all the plastic parts and the dual FRP chassis necessary to convert a TA-03R-S plastic tub chassis into a dual FRP chassis model.
However, the conversion to TA-03R-S TRF is not complete because the plates are FRP instead of carbon, and the plastic components are gray instead of black.
These are the instructions for building the chassis with the front and rear gear assemblies already prepared.
Additional sets are available to enhance performance and achieve a more faithful replica of the TA-03R-S TRF version. The list is closely tied to the image below, with the parts listed following the order in which they are arranged in the image, starting from the top-left corner and moving to the right and downward:
– Code 53056 described as “Pin Type Wheel Adapter Tamiya”,
– Code 53172 described as “TA-03 Universal Drive Shaft 1 pair,” alternatively, two sets with anodized collars are available: Code 53310 described as “TA-03 Universal Drive Blue Shaft 1 pair” and Code 49098 described as “TA-03 Universal Drive Shaft Pink 1 pair”,
– Code 53200 described as “4WD Front One-Way Diff Unit”,
– Code 53238 described as “Quick-Release Battery Holder”,
– Code 53276 described as “TA-03 Fluorescent Stabilizer Set,” including three different stabilizer bars: blue for hard setup, yellow for medium setup, and red for soft setup of the anti-roll bar,
– Code 53288 described as “TA-03 Aluminium Rear Upright”,
– Code 53316 described as “TA-03 Aluminium Front Hub Carrier 1 pair”,
– Code 53325 described as “TA-03 Aluminium Knuckle Arm 1 pair”,
– Code 53326 described as “TA-03 Aluminium Racing Steering Set”,
– Code 53357 described as “TA-03 Aluminium Motor Plate”,
– Code 53364 described as “TA-03R Carbon Steering Bar”,
– Code 53386 described as “TA-03RS/FS Carbon Chassis.”
It is possible to further improve performance by installing the aramid fiber-reinforced belt, which is thinner than the standard one and does not require a tensioner. Code 49103, red, described as “TA-03F-S / RS Belt Red.”
Conversion from TA-03F to TA-03F-S PRO:
There is no TA-03F-S PRO model in Tamiya’s portfolio that comes from the factory with a dual FRP short-wheelbase chassis plate. The closest model is the TA-03F PRO, featuring a dual FRP standard-wheelbase chassis plate. To enhance the performance of a TA-03F chassis, Tamiya offers an accessory that allows replacing the standard plastic tub chassis with a dual short-wheelbase FRP chassis (refer to the image on the right showing the components included in the set).
To convert a TA-03F plastic tub chassis into a TA-03F-S PRO, you need to purchase multiple parts:
– Code 53387 described as “TA-03 FS / RS FRP Chassis Conversion Set.” This includes all the necessary plastic parts to convert a TA-03F into a dual FRP chassis.
– Code 53297 short-wheelbase belt. Additionally, performance can be further enhanced by installing the aramid fiber-reinforced belt, Code 49103, red, described as “TA-03F-S / RS Belt Red.” It is thinner than the standard one and does not require a tensioner.
There is no TA-03F-S PRO Special Edition model in Tamiya’s portfolio that comes from the factory with a dual short-wheelbase carbon chassis plate. However, additional accessories are available to enhance the performance achieved by installing accessories 53387 and 53297. The list is closely tied to the image below, with the parts listed following the order in which they are arranged in the image, starting from the top-left corner and moving to the right and downward:
– Code 53056 described as “Pin Type Wheel Adapter Tamiya”,
– Code 53172 described as “TA-03 Universal Drive Shaft 1 pair,” alternatively, two sets with anodized collars are available: Code 53310 described as “TA-03 Universal Drive Blue Shaft 1 pair” and Code 49098 described as “TA-03 Universal Drive Shaft Pink 1 pair”,
– Code 53200 described as “4WD Front One-Way Diff Unit”,
– Code 53238 described as “Quick-Release Battery Holder” (not shown in the images below),
– Code 53276 described as “TA-03 Fluorescent Stabilizer Set,” including three different stabilizer bars: blue for hard setup, yellow for medium setup, and red for soft setup of the anti-roll bar,
– Code 53288 described as “TA-03 Aluminium Rear Upright”,
– Code 53316 described as “TA-03 Aluminium Front Hub Carrier 1 pair”,
– Code 53325 described as “TA-03 Aluminium Knuckle Arm 1 pair”,
– Code 53326 described as “TA-03 Aluminium Racing Steering Set”,
– Code 53357 described as “TA-03 Aluminium Motor Plate”,
– Code 53386 described as “TA-03RS/FS Carbon Chassis.”
Conversion from TA-03F-S to TA-03F Pro:
To enhance the performance of a TA-03F-S chassis, you can replace the short-wheelbase plastic tub chassis with a dual FRP standard-wheelbase chassis. For this conversion, Tamiya offers the parts set Code 53306, described as “TA-03F FRP Chassis Conversion Set” (refer to the image on the right showing the components included in the set), along with the standard-wheelbase belt Code 50706, described as “TA-03 Drive Belt.” This conversion transforms a TA-03F into a TA-03F Pro, model number 58177.
Additional accessories are available to improve performance and achieve a replica of the TA-03F PRO Special Edition model 58200. The list is closely tied to the image below, with the parts listed following the order in which they are arranged in the image, starting from the top-left corner and moving to the right and downward:
– Code 53056 described as “Pin Type Wheel Adapter Tamiya”,
– Code 53172 described as “TA-03 Universal Drive Shaft 1 pair,” alternatively, two sets with anodized collars are available: Code 53310 described as “TA-03 Universal Drive Blue Shaft 1 pair” and Code 49098 described as “TA-03 Universal Drive Shaft Pink 1 pair”,
– Code 53200 described as “4WD Front One-Way Diff Unit”,
– Code 53238 described as “Quick-Release Battery Holder” (not shown in the images below),
– Code 53276 described as “TA-03 Fluorescent Stabilizer Set,” including three different stabilizer bars: blue for hard setup, yellow for medium setup, and red for soft setup of the anti-roll bar,
– Code 53288 described as “TA-03 Aluminium Rear Upright”,
– Code 53316 described as “TA-03 Aluminium Front Hub Carrier 1 pair”,
– Code 53325 described as “TA-03 Aluminium Knuckle Arm 1 pair”,
– Code 53326 described as “TA-03 Aluminium Racing Steering Set”,
– Code 53357 described as “TA-03 Aluminium Motor Plate”,
– Code 53302 described as “TA-03F Carbon Chassis.”
It is possible to further improve performance by installing the aramid fiber-reinforced belt, which is thinner than the standard one and does not require a tensioner. Code 49102, blue, described as “TA-03F / R Belt Blue.”
Conversion from TA-03R to TA-03R-S TRF:
To enhance the performance of a TA-03R chassis, you can replace the plastic tub chassis with a dual FRP chassis. For this conversion, Tamiya offers various accessories:
– Code 53387 described as “TA-03 FS / RS FRP Chassis Conversion Set.” This includes all the necessary parts to convert a TA-03R TRF chassis into a dual FRP chassis (refer to the image on the right showing the components included in the set).
– Code 53297 short-wheelbase belt. Additionally, performance can be further enhanced by installing the aramid fiber-reinforced belt, Code 49103, red, described as “TA-03F-S / RS Belt Red.” It is thinner than the standard one and does not require a tensioner.
However, the conversion to TA-03R-S TRF is not complete because the plates are FRP instead of carbon, and the plastic components are gray instead of black.
Additional sets are available to enhance performance and achieve a more faithful replica of the TA-03R-S TRF. The list is closely tied to the image below, with the parts listed following the order in which they are arranged in the image, starting from the top-left corner and moving to the right and downward:
– Code 53056 described as “Pin Type Wheel Adapter Tamiya”,
– Code 53172 described as “TA-03 Universal Drive Shaft 1 pair,” alternatively, two sets with anodized collars are available: Code 53310 described as “TA-03 Universal Drive Blue Shaft 1 pair” and Code 49098 described as “TA-03 Universal Drive Shaft Pink 1 pair”,
– Code 53200 described as “4WD Front One-Way Diff Unit”,
– Code 53238 described as “Quick-Release Battery Holder”,
– Code 53276 described as “TA-03 Fluorescent Stabilizer Set,” including three different stabilizer bars: blue for hard setup, yellow for medium setup, and red for soft setup of the anti-roll bar,
– Code 53288 described as “TA-03 Aluminium Rear Upright”,
– Code 53316 described as “TA-03 Aluminium Front Hub Carrier 1 pair”,
– Code 53325 described as “TA-03 Aluminium Knuckle Arm 1 pair”,
– Code 53326 described as “TA-03 Aluminium Racing Steering Set”,
– Code 53357 described as “TA-03 Aluminium Motor Plate”,
– Code 53364 described as “TA-03R Carbon Steering Bar”,
– Code 53386 described as “TA-03RS/FS Carbon Chassis.”
Conversion from TA-03R-S to TA-03R FRP:
There is no TA-03R model in Tamiya’s portfolio that comes from the factory with a dual FRP chassis plate. The closest model is the TA-03R TRF, which features a dual carbon chassis plate. To enhance the performance of a TA-03R-S chassis, you can replace the short-wheelbase plastic tub chassis with a dual FRP standard-wheelbase chassis.
For this conversion, Tamiya offers the parts set Code 53350, described as “TA-03R FRP Chassis Conversion Set” (refer to the image on the right showing the components included in the set), along with the standard-wheelbase belt Code 50706, described as “TA-03 Drive Belt.”
Additional accessories are available to enhance performance and achieve a more faithful replica of the TA-03R TRF version. The list is closely tied to the image below, with the parts listed following the order in which they are arranged in the image, starting from the top-left corner and moving to the right and downward:
– Code 53056 described as “Pin Type Wheel Adapter Tamiya”,
– Code 53172 described as “TA-03 Universal Drive Shaft 1 pair,” alternatively, two sets with anodized collars are available: Code 53310 described as “TA-03 Universal Drive Blue Shaft 1 pair” and Code 49098 described as “TA-03 Universal Drive Shaft Pink 1 pair”,
– Code 53200 described as “4WD Front One-Way Diff Unit”,
– Code 53238 described as “Quick-Release Battery Holder”,
– Code 53276 described as “TA-03 Fluorescent Stabilizer Set,” including three different stabilizer bars: blue for hard setup, yellow for medium setup, and red for soft setup of the anti-roll bar,
– Code 53288 described as “TA-03 Aluminium Rear Upright”,
– Code 53316 described as “TA-03 Aluminium Front Hub Carrier 1 pair”,
– Code 53325 described as “TA-03 Aluminium Knuckle Arm 1 pair”,
– Code 53326 described as “TA-03 Aluminium Racing Steering Set”,
– Code 53357 described as “TA-03 Aluminium Motor Plate”,
– Code 53364 described as “TA-03R Carbon Steering Bar”,
– Code 53363 described as “TA-03R Carbon Chassis Set.”
It is possible to further improve performance by installing the aramid fiber-reinforced belt, which is thinner than the standard one and does not require a tensioner. Code 49102, blue, described as “TA-03F / R Belt Blue.”
Conversion from TA-03F Pro to TA-03F-S Pro
There is no TA-03F-S PRO Special Edition model in Tamiya’s portfolio that comes from the factory with a dual short-wheelbase carbon chassis plate. However, accessories are available to convert a TA-03F Pro chassis into a TA-03F-S Pro:
– Code 53387 described as “TA-03 RS / FS FRP Chassis Conversion Set.”
– Code 53386 described as “TA-03 RS / FS Carbon Chassis.”
– Code 53297 short-wheelbase belt. Performance can be further enhanced by installing the aramid fiber-reinforced belt, Code 49103, red, described as “TA-03F-S / RS Belt Red.” This belt is thinner than the standard one and does not require a tensioner.
Conversion from TA-03R TRF to TA-03R-S TRF
To convert a TA-03R TRF chassis into a TA-03R-S TRF, you will need multiple parts:
– Code 53387 described as “TA-03 RS / FS FRP Chassis Conversion Set.”
– Code 53386 described as “TA-03 RS / FS Carbon Chassis.”
– Code 53297 short-wheelbase belt. Performance can be further enhanced by installing the aramid fiber-reinforced belt, Code 49103, red, described as “TA-03F-S / RS Belt Red.”
– Code 53200 described as “4WD Front One-Way Differential Unit.”
– Code 53326 described as “TA-03 Aluminium Racing Steering Set.”
The conversion is complete, resulting in a replica that matches the characteristics of the TA-03R-S TRF model because all necessary accessories are included, and the plastic components are entirely black.
Conversion from TA-03R-S TRF to TA-03R TRF
To convert a TA-03R-S TRF chassis into a TA-03R TRF, you will need multiple parts:
– Code 53350 described as “TA-03R FRP Chassis Conversion Set.”
– Code 53363 described as “TA-03R Carbon Chassis Set.”
– Code 50706 described as “TA-03 Drive Belt.” Performance can be further enhanced by installing the aramid fiber-reinforced belt, Code 49102, blue, described as “TA-03F / R Belt Blue.” This belt is thinner than the standard one and does not require a tensioner.
The conversion is complete, resulting in a replica that matches the characteristics of the TA-03R TRF model because all necessary accessories are included, and the plastic components are entirely black.